tlz-series www.vishay.com vishay semiconductors rev. 2.2, 26-jun-12 1 document number: 85635 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? very sharp reverse characteristic ? low reverse current level ? very high stability ?low noise ? high reliability ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? voltage stabilization primary characteristics parameter value unit v z range nom. 2.4 to 56 v test current i zt 5 to 20 ma v z specification pulse current int. construction single ordering information device name ordering code taped units per reel minimum order quantity tlz-series tlz-series-g s18 10 000 (8 mm tape on 13" reel) 10 000/box tlz-series tlz-series-gs08 2500 (8 mm tape on 7" reel) 12 500/box package package name weight molding compound flammability rating moisture sensitivity level soldering conditions minimelf sod-80 31 mg - msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissipation r thja ? 300 k/w p tot 500 mw zener current i z p tot /v z ma junction to ambient air on pc board 50 mm x 50 mm x 1.6 mm r thja 500 k/w junction temperature t j 175 c storage temperature range t stg - 65 to + 175 c forward voltage (max.) i f = 200 ma v f 1.5 v
tlz-series www.vishay.com vishay semiconductors rev. 2.2, 26-jun-12 2 document number: 85635 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range test current reverse leakage current dynamic resistance v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 v ma a v ? min. nom. max. max. max. max. tlz2v4a 2a4 2.33 2.4 2.52 20 1 70 1 100 2000 tlz2v4b 2b4 2.43 2.4 2.63 20 1 70 1 100 2000 tlz2v7a 2a7 2.54 2.7 2.75 20 1 50 1 100 1000 tlz2v7b 2b7 2.69 2.7 2.91 20 1 50 1 100 1000 tlz3v0a 3a0 2.85 3.0 3.07 20 1 50 1 80 1000 tlz3v0b 3b0 3.01 3.0 3.22 20 1 10 1 80 1000 tlz3v3a 3a3 3.16 3.3 3.38 20 1 10 1 70 1000 tlz3v3b 3b3 3.32 3.3 3.53 20 1 10 1 70 1000 tlz3v6a 3a6 3.455 3.6 3.695 20 1 5 1 60 1000 tlz3v6b 3b6 3.6 3.6 3.845 20 1 5 1 60 1000 tlz3v9a 3a9 3.74 3.9 4.01 20 1 3 1 50 1000 tlz3v9b 3b9 3.89 3.9 4.16 20 1 3 1 50 1000 tlz4v3a 4a3 4.04 4.3 4.29 20 1 3 1 40 1000 tlz4v3b 4b3 4.17 4.3 4.43 20 1 3 1 40 1000 tlz4v3c 4c3 4.3 4.3 4.57 20 1 3 1 40 1000 tlz4v7a 4a7 4.44 4.7 4.68 20 1 5 1 25 900 tlz4v7b 4b7 4.55 4.7 4.8 20 1 5 1 25 900 tlz4v7c 4c7 4.68 4.7 4.93 20 1 5 1 25 900 tlz5v1a 5a1 4.81 5.1 5.07 20 1 2 2 20 800 tlz5v1b 5b1 4.94 5.1 5.2 20 1 2 2 20 800 tlz5v1c 5c1 5.09 5.1 5.37 20 1 2 2 20 800 tlz5v6a 5a6 5.28 5.6 5.55 20 1 1 2 13 500 tlz5v6b 5b6 5.45 5.6 5.73 20 1 1 2 13 500 tlz5v6c 5c6 5.61 5.6 5.91 20 1 1 2 13 500 tlz6v2a 6a2 5.78 6.2 6.09 20 1 3 4 10 300 tlz6v2b 6b2 5.96 6.2 6.27 20 1 3 4 10 300 tlz6v2c 6c2 6.12 6.2 6.44 20 1 3 4 10 300 tlz6v8a 6a8 6.29 6.8 6.63 20 0.5 2 4 8 150 tlz6v8b 6b8 6.49 6.8 6.83 20 0.5 2 4 8 150 tlz6v8c 6c8 6.66 6.8 7.01 20 0.5 2 4 8 150 tlz7v5a 7a5 6.85 7.5 7.22 20 0.5 3 6.5 8 120 tlz7v5b 7b5 7.07 7.5 7.45 20 0.5 3 6.73 8 120 tlz7v5c 7c5 7.29 7.5 7.67 20 0.5 3 6.93 8 120 tlz8v2a 8a2 7.53 8.2 7.92 20 0.5 7.5 7.15 8 120 tlz8v2b 8b2 7.78 8.2 8.19 20 0.5 7.5 7.39 8 120 tlz8v2c 8c2 8.03 8.2 8.45 20 0.5 7.5 7.63 8 120 tlz9v1a 9a1 8.29 9.1 8.73 20 0.5 0.04 7.88 8 120 tlz9v1b 9b1 8.57 9.1 9.01 20 0.5 0.04 8.14 8 120 tlz9v1c 9c1 8.83 9.1 9.3 20 0.5 0.04 8.39 8 120 tlz10a 10a 9.12 10 9.59 20 0.5 0.04 8.66 8 120 tlz10b 10b 9.41 10 9.9 20 0.5 0.04 8.94 8 120 tlz10c 10c 9.7 10 10.2 20 0.5 0.04 9.22 8 120 tlz10d 10d 9.94 10 10.44 20 0.5 0.04 9.44 8 120
tlz-series www.vishay.com vishay semiconductors rev. 2.2, 26-jun-12 3 document number: 85635 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tlz11a 11a 10.18 11 10.71 10 0.5 0.04 9.67 10 120 tlz11b 11b 10.5 11 11.05 10 0.5 0.04 9.98 10 120 tlz11c 11c 10.82 11 11.38 10 0.5 0.04 10.28 10 120 tlz12a 12a 11.13 12 11.71 10 0.5 0.04 10.6 12 110 tlz12b 12b 11.44 12 12.03 10 0.5 0.04 10.9 12 110 tlz12c 12c 11.74 12 12.35 10 0.5 0.04 11.2 12 110 tlz13a 13a 12.11 13 12.75 10 0.5 0.04 11.5 14 110 tlz13b 13b 12.55 13 13.21 10 0.5 0.04 11.9 14 110 tlz13c 13c 12.99 13 13.66 10 0.5 0.04 12.3 14 110 tlz15a 15a 13.44 15 14.13 10 0.5 0.04 12.8 16 110 tlz15b 15b 13.89 15 14.62 10 0.5 0.04 13.2 16 110 tlz15c 15c 14.35 15 15.09 10 0.5 0.04 13.6 16 110 tlz16a 16a 14.8 16 15.57 10 0.5 0.04 14.1 18 150 tlz16b 16b 15.25 16 16.04 10 0.5 0.04 14.5 18 150 tlz16c 16c 15.69 16 16.51 10 0.5 0.04 14.9 18 150 tlz18a 18a 16.22 18 17.06 10 0.5 0.04 15.4 23 150 tlz18b 18b 16.82 18 17.7 10 0.5 0.04 16 23 150 tlz18c 18c 17.42 18 18.33 10 0.5 0.04 16.5 23 150 tlz20a 20a 18.02 20 18.96 10 0.5 0.04 17.1 28 200 tlz20b 20b 18.63 20 19.59 10 0.5 0.04 17.7 28 200 tlz20c 20c 19.23 20 20.22 10 0.5 0.04 18.3 28 200 tlz20d 20d 19.72 20 20.72 10 0.5 0.04 18.7 28 200 tlz22a 22a 20.15 22 21.2 5 0.5 0.04 19.1 30 200 tlz22b 22b 20.64 22 21.71 5 0.5 0.04 19.6 30 200 tlz22c 22c 21.08 22 22.17 5 0.5 0.04 20 30 200 tlz22d 22d 21.52 22 22.63 5 0.5 0.04 20.4 30 200 tlz24a 24a 22.05 24 23.18 5 0.5 0.04 20.9 35 200 tlz24b 24b 22.61 24 23.77 5 0.5 0.04 21.5 35 200 tlz24c 24c 23.12 24 24.31 5 0.5 0.04 22 35 200 tlz24d 24d 23.63 24 24.85 5 0.5 0.04 22.4 35 200 tlz27a 27a 24.26 27 25.52 5 0.5 0.04 23 45 250 tlz27b 27b 24.97 27 26.26 5 0.5 0.04 23.7 45 250 tlz27c 27c 25.63 27 26.95 5 0.5 0.04 24.3 45 250 tlz27d 27d 26.29 27 27.64 5 0.5 0.04 25 45 250 tlz30a 30a 26.99 30 28.39 5 0.5 0.04 25.6 55 250 tlz30b 30b 27.7 30 29.13 5 0.5 0.04 26.3 55 250 tlz30c 30c 28.36 30 29.82 5 0.5 0.04 26.9 55 250 tlz30d 30d 29.02 30 30.51 5 0.5 0.04 27.6 55 250 tlz33a 33a 29.68 33 31.22 5 0.5 0.04 28.2 65 250 tlz33b 33b 30.32 33 31.88 5 0.5 0.04 28.8 65 250 tlz33c 33c 30.9 33 32.5 5 0.5 0.04 29.4 65 250 tlz33d 33d 31.49 33 33.11 5 0.5 0.04 29.9 65 250 tlz36a 36a 32.14 36 33.79 5 0.5 0.04 30.5 75 250 tlz36b 36b 32.79 36 34.49 5 0.5 0.04 31.2 75 250 tlz36c 36c 33.4 36 35.13 5 0.5 0.04 31.7 75 250 tlz36d 36d 34.01 36 35.77 5 0.5 0.04 32.3 75 250 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range test current reverse leakage current dynamic resistance v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 v ma a v ? min. nom. max. max. max. max.
tlz-series www.vishay.com vishay semiconductors rev. 2.2, 26-jun-12 4 document number: 85635 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - total power dissipation vs. ambient temperature fig. 2 - typical change of working voltage under operating conditions at t amb = 25 c fig. 3 - typical change of working voltage vs. junction temperature fig. 4 - temperature coefficient of v z vs. z-voltage tlz39a 39a 34.68 39 36.47 5 0.5 0.04 32.9 85 250 tlz39b 39b 35.36 39 37.19 5 0.5 0.04 33.6 85 250 tlz39c 39c 36 39 37.85 5 0.5 0.04 34.2 85 250 tlz39d 39d 36.63 39 38.52 5 0.5 0.04 34.8 85 250 tlz39e 39e 37.36 39 39.29 5 0.5 0.04 35.5 85 250 tlz39f 39f 38.14 39 40.11 5 0.5 0.04 36.2 85 250 tlz39g 39g 38.94 39 40.8 5 0.5 0.04 37 85 250 tlz43 43 40 43 45 5 - 0.04 38 90 - tlz47 47 44 47 49 5 - 0.04 41.8 90 - tlz51 51 48 51 54 5 - 0.04 45.6 100 - tlz56 56 53 56 60 5 - 0.04 50.4 100 - electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range test current reverse leakage current dynamic resistance v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 v ma a v ? min. nom. max. max. max. max. 0 120 160 0 100 300 400 500 600 p tot - total po w er dissipation (m w ) t am b - am b ient temperat u re (c) 200 95 9602 200 80 40 10 15 20 1 10 100 1000 v z - v oltage change (m v ) v z - z- v oltage ( v ) 25 95 9598 t j = 25 c i z = 5 ma 0 5 - 60 60 120 180 0.8 0.9 1.0 1.1 1.2 1.3 v ztn - relative voltage change t j - junction temperature (c) 240 95 9599 0 v ztn = v zt /v z (25 c) 0 tk vz = 10 x 10 -4 /k 8 x 10 -4 /k 2 x 10 -4 /k 6 x 10 -4 /k 4 x 10 -4 /k - 4 x 10 -4 /k - 2 x 10 -4 /k - 5 0 5 10 15 v z - z- v oltage ( v ) 95 9600 i z = 5 ma 0 10 203040 50 tk v z - temperat u re coefficient of v z (10 -4 /k)
tlz-series www.vishay.com vishay semiconductors rev. 2.2, 26-jun-12 5 document number: 85635 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - diode capacitance vs. z-voltage fig. 6 - forward current vs. forward voltage fig. 7 - z-current vs. z-voltage fig. 8 - z-current vs. z-voltage fig. 9 - differential z-resistance vs. z-voltage 10 15 0 50 100 150 200 c d - diode capacitance (pf) v z - z- v oltage ( v ) 25 95 9601 20 t j = 25 c v r = 2 v 0 5 0 0.2 0.4 0.6 0.8 0.001 0.01 0.1 1 10 100 1.0 95 9605 i f - for w ard c u rrent (ma) v f - for w ard v oltage ( v ) t j = 25 c 8 20 95 9604 0 20 40 60 80 100 i z - z-c u rrent (ma) p tot = 500 m w t am b = 25 c 046 12 v z - z- v oltage ( v ) 15 20 25 30 0 10 20 30 40 50 i z - z-c u rrent (ma) v z - z- v oltage ( v ) 35 95 9607 p tot = 500 m w t am b = 25 c 0 101520 1 10 100 1000 25 95 9606 t j = 25 c i z = 1 ma 5 ma 10 ma v z - z- v oltage ( v ) r z - differential z-resistance ( ) 5
tlz-series www.vishay.com vishay semiconductors rev. 2.2, 26-jun-12 6 document number: 85635 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 10 - thermal response marking voltage group remark the zener voltage group tlz2v4a is printed with max 3 digits 3 times on the surface. the ma rking should be readable at minimum 2 times. the third print is allowed to be incompl ete due to tolerances in diameter of the glass body. 1 10 100 1000 z thp - thermal resistance for p u lse cond. (k/ w ) t p - p u lse length (ms) 95 9603 10 -1 10 0 10 1 10 2 t p /t = 0.5 t p /t = 0.2 t p /t = 0.1 t p /t = 0.05 t p /t = 0.02 t p /t = 0.01 single p u lse r thja = 300 k/ w t = t j max. - t am b i zm = (- v z + ( v z 2 + 4r zj x t/z thp ) 1/2 )/(2r zj ) 2a4 2a4 2a4 2a4 tlz2v4a 18660_2
tlz-series www.vishay.com vishay semiconductors rev. 2.2, 26-jun-12 7 document number: 85635 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): minimelf sod-80 cathode indentification 0.47 (0.019) max. 2.5 (0.098) max. 1.25 (0.49) min. 3.7 (0.146) 3.3 (0.130) 5 (0.197) ref. 2 (0.079) min. 1.6 (0.063) 1.4 (0.055) foot print re commendation: * * the gap b et w een pl u g and glass can b e either on cathode or anode side doc u ment no.:6.560-5005.01-4 re v . 8 - date: 07.j u ne.2006 96 12070
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
